5.3 KNX
Here, all KNX specific addresses are shown. Setting changes can easily be checked. With a simple click on
«
On
»
or
«
Off
»
Programming Mode can be switched on/off. This function is equivalent to a Programming
Button press. Together with the Device Info tab it is easy to distinguish the regarded device (with a certain
IP address or MAC address or serial number) from other similar devices in the same IP network.
Four tunneling addresses can be set. ETS sets the first tunneling address. With a click on
«
Set
»
the
remaining ones are set. Moreover, routing multicast address and serial number of the device are shown.
Figure 9.
KNX tab
The web browser used has to support SVG graphics.
page 18
module-electronic.ru
