background image

7  LEGAL NOTICE

Lw IP is used in developing the 

IC-IP-S.1.0.

Lw IP is licenced under the BSD license.

Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved.

Providing that the following conditions are met redistribution and use in source and binary forms, with or 
without modification, are permitted:

џ

Redistributions  of  the  source  code  must  retain  the  above copyright notice,  this  list  of  conditions 
and the following disclaimer.

џ

Redistributions  in  binary  form  must  reproduce  the  above copyright notice,  this  list  of  conditions 
and  the  following  disclaimer  in  the  documentation  and/or  other  materials  provided  with  the 
distribution.

џ

The  name  of  the  author  may  not  be  used  to  endorse  or  promote  products  derived  from  this 
so ware without specific prior written permission.

THIS  SOFTWARE  IS  PROVIDED  BY  THE  AUTHOR  ``  AS  IS  AND  ANY  EXPRESS  OR  IMPLIED  WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 
INDIRECT,  INCIDENTAL,  SPECIAL,  EXEMPLARY,  OR  CONSEQUENTIAL  DAMAGES  (INCLUDING,  BUT  NOT 
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS  INTERRUPTION)  HOWEVER  CAUSED  AND  ON  ANY  THEORY  OF  LIABILITY,  WHETHER  IN 
CONTRACT,  STRICT  LIABILITY,  OR  TORT  (INCLUDING  NEGLIGENCE  OR  OTHERWISE)  ARISING  IN  ANY  WAY 
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

page 23

module-electronic.ru

Summary of Contents for Module IC-IP-S.1.0
























Reviews: