Antenna
®
Telescope
™
Antenna
®
Telescope
™
Installation Instructions
October 2018
59
Telescope 120˚ Triad with Beam
(with or without Dual Utility Trays)
PREPARE 120° MID POSITION COLUMN
LEGS AND TRIANGULAR STRUCTURE:
10. Attach 120 Degree Center Rail Cradles [one LH
(GG) and one RH (HH)] to the housing on a 120
Degree Column Leg Assembly (FF), using (2)
5
/
16
-18 x 1-¼" button head hex machine screws
(II) per cradle.
Repeat for other two 120 Degree
Column Leg Assemblies (FF).
11. Construct the central triangular structure
by linking (3) 120 Degree Y Brackets (JJ) to
(3) 120 Degree Tri Crossbars (KK). Ensure
that all three Tri Crossbars are oriented
correctly, with the NARROW beam hole
pair at the top. The UP arrows on the
three Y Brackets should be pointing up.
Secure with (4) ¼-20 x
5
/
8
" flat head Phillips
machine screws (M) per Y Bracket.
12. Add (3) Mini Crossbars (LL) to the triangular
structure, using (2) ¼-20 x
5
/
8
" flat head
Phillips machine screws (M) per crossbar.
CONNECT SUB-ASSEMBLIES:
13. Stand the (3) mid position column leg
assemblies up and insert the column
brackets into the mini crossbars at the
ends of the triangular structure. Secure
using (2)
5
/
16
-18 x ¾" flat head hex
machine screws (N) per crossbar.
Mid Position Column Legs and Triangular Structure
Assembly, Partially Exploded Detail, Steps 10-13
Step 10
120 Degree Center
Rail Cradle, RH (HH)
120 Degree Leg
Assembly (FF)
120 Degree Center
Rail Cradle, LH (GG)
5
/
16
-18 x 1-¼" Button Head
Hex Machine Screws (II)
Step 11
120 Degree Tri
Crossbar (KK)
120 Degree Y
Brackets (JJ)
¼-20 x
5
/
8
" Flat Head Phillips
Machine Screw (M)
Step 12 & 13
Mini Crossbar (LL)
(2)
5
/
16
-18 x 1-¾" Flat Head
Hex Machine Screws (N)
(2) ¼-20 x
5
/
8
" Flat Head
Phillips Machine Screws (M)