Antenna
®
Telescope
™
Antenna
®
Telescope
™
Installation Instructions
October 2018
31
Telescope Dual Table Bases with Beam (with or
without Dual Utility Trays) - Extended Electric
STEPS
Note:
Before assembly, determine if table is
“standalone", “end", or “intermediate" in application.
PREPARE LEGS & CROSSBARS:
1. Attach (2) Horizontal Rail Cradles (C) to the
upper housing boxes on the Right Hand
and Left Hand Column Leg Assemblies
(A/B), with (2) 5/16-18 x 1 1/4" button head
hex machine screws (L) per cradle.
2. Attach a Housing Cover (E) to the short end
of each housing, using (2) 1/4-20 x 5/8" flat
head Phillips machine screws (M) per cover.
3. Attach a Transformer Shelf (F) to the opposite
side of each housing, using (2) 1/4-20 x 5/8" flat
head Phillips machine screws (M) per shelf. w
Exploded Table Base With Beam and
Dual Utility Trays Assembly, Steps 1-3
Step 1
Step 3
Step 2
1/4-20 x 5/8" Flat
Head Phillips
Machine Screw (M)
Left Hand Column
Leg Assembly (B)
Right Hand Column
Leg Assembly (A)
Housing
Cover (E)
5/16-18 x 1 1/4"
Button Head Hex
Machine Screw (L)
Horizontal Rail
Cradle (C)
Transformer Shelf (F)
1/4-20 x 5/8" Flat
Head Phillips
Machine Screw (M)
