Knick Unical 9000, Installation Manual

Page: 34 / 80

34
8.3 Media Supply to Unical 9000(X)
Connecting the Media Tubes (Media Connection)
Retractable fitting
Water
Flex. tube, Ø 6 mm,
transparent
A
E
Aux 1 purge air
Compressed-air sup-
ply to media adapter
Flex. tube, Ø 6 mm,
transp. / red marking
Flex. tube, Ø 6 mm, green
Flex. tube, Ø 8 mm, green
B
C
Overview
Media connection
Use this special wrench
(included in supply)
to tighten the media
connection.
Pneumatic Push-In Connections
• To fasten a tube: Push it into the connector until it hits the stop
(you have to overcome an initial resistance).
•
To loosen a tube:
Press the blue ring against the fitting using two fingers.
At the same time, slightly push the tube into the fitting and then pull it out.
1.
Remove the securing nut and insert the media connection hose including
the tubes and the check-back cable through the opening in the Unical.
2. Push the securing nut over the tubes and pull it tight using the included
special wrench. The tubes are clearly identifiable.
Filter
Water trap
Water supply
comes with label ”Wasser/Water”
inside G 1/4”, outside G 3/4”
Compressed air supply
(hidden behind filter)
comes with label ”Luft/Air”
inside G 1/4”
(Option)
Flex. tube, Ø 6 mm,
transparent
Aux 2
(Option)
D
Flex. tube, Ø 6 mm,
transparent