Knick Unical 9000 Installation Manual Download

Page: 10 / 80

4 Safety Information

Application in Hazardous Locations

The Unical 9000X probe controller is intended for operation in ambient

conditions and applications as specified in this manual (see “Intended Use“,

page 8 and “Specifications“, page 62).

The Unical 9000X may be opened during operation.

NOTICE

These installation instructions do NOT describe

• how to operate the retractable fitting

• how to control the programs via the Protos 3400(X) process analysis

system.

The user manuals for retractable fittings and the Protos 3400(X) modular

process analysis system are available for free download at www.knick.de.

CAUTION

Power Supply

The Unical 9000(X) should preferably be supplied through the Protos

3400(X). Be sure to observe the safety information in the user manual for the

Protos 3400(X) basic unit.

Summary of Contents for Unical 9000

















































































Search results

Summary of Contents for Unical 9000

Reviews:

Related manuals for Unical 9000

Brands by name

Popular brands

Knick Unical 9000, Installation Manual

Search results

Summary of Contents for Unical 9000

Reviews:

Related manuals for Unical 9000

Brands by name

Popular brands