manualshive.com logo in svg

Knick Protos CONDI 3400(X)-051, User Manual

Share
Download
Knick Protos CONDI 3400(X)-051 User Manual Download Page 78

78

Set/delete favorite:

“Set favorite” allows activation of the 

selected diagnostic function directly 

from the measuring mode via softkey.

The menu line is marked with a heart 

icon.

Pressing the meas key returns to 

measurement. When the softkey has 

been assigned to “Favorites”, “Favorites 

menu” is read in the secondary display 

(see “Function control matrix”).

Notice:

When one of the softkeys has been assigned to the “Favorites menu” function, 

diagnostic functions which have been set as “Favorite” can be directly called 

from the measuring mode.

Menu Display 

Select favorites

Favorites menu

Diagnostics functions can be called 

directly from the measuring mode 

using a softkey. 

The “Favorites” are selected in the 

Diagnostics menu.

Select favorites

Press menu key to select menu.

Select diagnostics using arrow keys, 

confirm with enter. Then select 

 module and confirm with enter.

09.03.10

Favorites menu

09.03.10

Favorites menu

Menu selection

Return to meas

0245 mS/cm

25.6 °C

Select:

[enter]

Lingua

Return

25.6 °C

Set favorite

0245 mS/cm

Sensor monitor

Cal record

Module diagnostics

Module CONDI 3400-051

0.245

0.245

Summary of Contents for Protos CONDI 3400(X)-051

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands