43
From the application window of the Excel file, select the worksheet for the
module the parameter settings of which you want to document.
Set the parameters of the respective module and enter the selected values in
the corresponding cells of the module worksheet.
Display
The "HOLD" mode is active during parameter setting.
HOLD. The NAMUR “HOLD” contact (function check) is active (factory setting: Module BASE,
Contact K2, N/O contact). Current output response is user-defined:
• Current meas.:
The currently measured value appears at the current output
• Last usable value: The last measured value is held at the current output
• Fixed 22 mA:
The output current is at 22 mA
NOTICE!
Documenting Parameter Setting
