48
8. Control
8.3.1 Data
“Type of knife”: circular / sickle knife
“Direction Circular Knife”: 0 = left, 1 = right
“Holder”: Index as to which holder will be used
for processing the knife
“Process Speed”: Processing speed at which the
cam disc rotates during the grinding process
(mm / s)
“Upwards after processing”: true = yes, false = no
(for better assembly or assembly with suspension
protection)
8.3.2 Abrasives
“Front Grinding Wheel”
“Rear Grinding Wheel”
8.3.3 Steps
“Tool”: Selection of the abrasives
“Cycles”: Number 1, 2, 3
“Angle Tool 1 (front)”: Angle adjustment of front
grinding wheel (the set grinding angle is dis-
played. Grinding wheel adjustment – Chapter 7.5)
“Angle Tool 2 (rear)”: Angle adjustment of rear
grinding wheel (the set grinding angle is dis-
played. Grinding wheel adjustment – Chapter 7.5)
“Overrun Start”: Distance limit switch is reached
“Front lift off Start”: Front grinding wheel is
raised, true = yes, false = no
“Back lift off Start”: Rear grinding wheel is raised,
true = yes, false = no
“Overrun end”: Distance limit switch is reached
“Front lift off End”: Front grinding wheel is raised
from knife, true = yes, false = no
“Back lift off End”: Rear grinding wheel is raised
from knife, true = yes, false = no
“Half Cycle”: Tool only does half cycle
Figure 8-4
Grinding data “Data”
Figure 8-5
Grinding data “Abrasives”
Figure 8-6
Grinding data “Steps”
