31
Insert cam disc SP 116 (7-5/1) in the bracket
(3-4/3) and tighten with flat wrench SW19.
Hand tighten the cam disc in such a way that the
boreholes (7-5/2) are oriented in the direction of
the grinding wheels.
The spigot (7-6/1) and centering pin (7-6/2) must
engage appropriately in the cam disc.
ATTENTION
Incorrect positioning of cam disc SP 116 can
damage the limit switches and the drive
pinion.
Close the protective doors.
Press “Home Position” (7-7/1) on the touch panel
in the main menu to move the cam disc into the
change position.
The cam disc moves to a position suitable for
placing of knives.
7. Operation
Figure 7-5
Mounting cam disc SP 116
Figure 7-6
Spigot and centering pin
1
2
Figure 7-7
Move cam disc into change position
1
2
1
