40
7. Operation
There is a risk of clothing and hair getting entangled. There is a risk of
hands being crushed. Serious injury may result.
To prevent dust formation, always have the coolant tap on while dress-
ing and direct the coolant hose at the grinding wheels.
Never dress with mounted knives.
Serious cutting injuries may result.
CAUTION
7.3 Dressing the front / rear ceramic grinding wheels
If the front grinding wheel is running out of true
or is loaded, it must be dressed.
Set the grinding discs to a comfortable position
(approx. 34° – see Chapter 7.5).
Change to settings via the main menu “F5 Set-
tings” (3-8/15).
Switch on the front grinding wheel. To do so,
press “Front Grinding Wheel On / Off” (7-21/1) on
the touch panel.
ATTENTION
Turn the “Setting Mode” key switch
(3-7/5) to position “1”.
Insert the deburring lever (7-22/1) as far as it will
go into the relevant bushing. Move the dressing
diamond (7-22/2) with the deburring lever evenly
over the grinding wheel, which is switched on.
The dressing diamond is fed by rotating the ad-
justing nut (7-22/3) in clockwise direction.
Figure 7-22
Dress front grinding wheel
Figure 7-21
Settings
1
2
1
3
2
