10
Setup of the HPLC Pump K–1001
Rear Panel View of the HPLC Pump K–1001
{5.10} {5.1} {5.2} {5.3}
{5.4}
{5.5}
{5.6}
{5.7}
{5.9}
{5.8}
5
Rear panel elements
5.1 Fuse
compartment
5.6 Ventilator
5.2 Power
connector
5.7 Serial
number
5.3
ON/OFF switch
5.8
Terminal strip REMOTE con-
nections
5.4
RS-232 interfaces
5.9
Terminal strip REMOTE con-
nections
5.5
Socket prepared for Ethernet
connection
5.10 Plug for interconnection of
Solvent Organizer K-1500
Fig. 4
Rear Panel of the HPLC Pump K–1001
Connection to Main Power
The WellChrom HPLC Pump K-1001is equipped with an universal power supply
for input voltages ranging from 90 to 260 Volts AC. A manual setting of the
supply voltage is not required.
Make sure that the main power supply is properly grounded and a correct
three-pronged power cable is used. Connecting the instrument to faulty
power sockets can cause damages.
Connect the power cable to the socket on the rear of the instrument, and switch
on the device with the ON/OFF key, see {5.2} and {5.3} in Fig. 4.
