14
Unpacking and Setup
P 2.1S/P 4.1S user manual V6870, version 3.1
3. Open the accessories kit and take out all accessories. In case any parts are
missing, contact the technical support. Grip the device at its side panels and
lift it out of the packaging.
4. Remove the foam inserts from the device. Pull off the antistatic bag, if neces-
sary.
5. Check for damages caused during transportation. In case you notice any
damage, contact the technical support.
6. Set-up the device in its location.
7. Check the scope of delivery
8. Remove the protective foil.
Result:
The device is complete and ready for use.
Next steps:
Connect the device to power supply to prepare the initial startup.
Connecting the Eluent Line to the Pump Head
Prerequisite:
The device has been switched off.
The power plug has been pulled.
Tools:
Flangeless fitting
Device defect
The pump head can get damaged when the inlet and outlet are blocked.
Remove the cap fittings from the inlet and outlet of the pump head prior to
use.
Process
Figure
1. Slide the flangeless fitting onto the
tubing.
2. Insert the tubing into the free inlet
1
on the bottom of the pump
head.
3. Tighten the fitting by hand.
Fig. 5
Solvent line on the pump head
1
