24
Changing the heat/cool element
AZURA® CT 2.1 Service Instructions VSM-020
Process
Figure
4.
Lay the device with the
door facing down on a
soft and clean surface, for
example a blanket.
5.
Loosen 2 hexagon screws
on the top of the device.
These two screws hold the
mounting rails of the heat/
cool element. A greater
effort might be needed.
6.
Turn the device around so
the bottom of the device
faces you. Loosen the 2
screws at the bottom of the
device to be able to remo-
ve the heat/cool element.
Fig. 32
Top/bottom view of the device
(without side panels)
7.
Remove the old heat/cool
element by carefully pulling
it out of the device.
Fig. 33
Removing the heat/cool
element
The heat/cool element has been removed.
Install the new heat/cool element.
Result
Next step
