15
Door
AZURA® CT 2.1 Service Instructions VSM-020
5.1.2 Installing the door
The device has been switched off.
The power plug has been removed.
The door has been removed.
Phillips-head screwdriver 2.5 mm
Process
Figure
Procedure
1. Reinstall the upper
retaining plate
1
of
the door by tight-
ening both screws
2
.
2. Repeat step 1 to
reinstall the lower
retaining plate.
Note:
Fix the screws in
such a way that the flat
head screws have
enough room.
Fig. 13:
Tightening screws
3. Put the washer back
on the hinge pin of
one side of the door
4. Reinstall this side of
the door by pushing
the hinge pin of the
retaining plate with
the washer in the
hinge.
Fig. 14:
Door with hinge pin
5. Put the washer back
on the hinge pin of
the second side of
the door.
6. Reinstall the second
side of the door by
pushing the hinge
pin in the door until
stop and push the
door in the right
direction and the
hinge pin in the
hinge.
Fig. 15:
Push washer back to hinge
Bring the device into operation.
Prerequisites
Tool
1
2
Next step
