19
Changing the heat/cool element
AZURA® CT 2.1 Service Instructions VSM-020
7. Changing the heat/cool element
7.1 Removing rear plate of the device
The device has been switched off.
The power plug has been removed.
Torx screwdriver T10
Process
Figure
1.
Loosen the 6 Torx screws.
Fig. 21
Loosen the screws with a
Torx screwdriver
Prerequisite
Tools
Electronic defect
Performing maintenance tasks on a switched on device can cause da-
mage to the device.
Î
Switch off the device
Î
Pull the power plug.
Electronic defect
Electrostatic discharge can destroy the electronics.
Î
Wear a protective bracelet against electrostatic discharge and ground.