KMC Controls KMD-5210, Installation And Operation Manual

Page: 35 / 38


KMD–5210 Installation and Operation
Revision E
Configuration and programming
Configuring a controller with HCM
35
BACnet configuration
If the controller is configured for BACnet and connected to a BACnet network,
the controller must be configured to communicate with the network. BACNet
is a licensed option in models listed below. This procedure applies only to
these models.
◆
KMD-5210–001 (BACnet 802.3)
◆
KMD-5210–002 (BACnet MS/TP)
Detail
BACnet device settings are covered in more detail in the BACstage Reference
Guide that is available in Adobe Acrobat format on the KMC Controls web site.
See the topic
Device Objects in the section The Object Menu .
Table 4-3 Tier 1 BACnet settings
Setting Description
Instance The device instance number as assigned by the BACnet system
designer. Instance numbers are required, must be unique among all
devices on the internetwork and range from 0 to 4,194,303.
Name A required 16-character label of the device. Name must be unique
among all devices on the internetwork. The set of characters used
in
Name is restricted to printable characters.
Location Optional information used to further identify a piece of equipment.
Description Optional information used to further identify a piece of equipment.
APDU Timeout Indicates the period—in milliseconds— between retransmissions of
an APDU requiring an acknowledgement for which no
acknowledgment has been received. The default value is 3000
milliseconds.
Max Master Enter the highest MAC address the controller will attempt to locate
while polling for a master device on the local network.
Token Timeout Enter the period a controller must wait to see if a remote node
responds to a request or starts using the token. The range is 20-100
milliseconds.