klover ECOMPACT 150, Installation, Use, Maintenance And Helpful Tips

Page: 45 / 56

39
PELLET-BURNING BOILER ECOMPACT 150-190-250-290 EN -
Rev 1.1
Pr03 M08 – 6 – 03 Time interval between the two brazier cleaning operations BRAZIER CLEANING Minutes 3 – 240 60
Pr04 M08 – 6 – 04 Screw feed gear motor ON time in ignition phase IGNIT- SCREW FEED Seconds 0.1 – 8.0 1.2
Pr05 M08 – 6 – 05 Screw feed gear motor ON time in start phase SCREW FEED START Seconds 0.1 – 8.0 1.4
Pr06 M08 – 6 – 06 Screw feed gear motor ON time in power 1 work phase
OUTPUT 1 SCREW
FEED
Seconds 0.1 – 8.0 3.4
Pr07 M08 – 6 – 07 Screw feed gear motor ON time in power 2 work phase
OUTPUT 2 SCREW
FEED
Seconds 0.1 – 8.0 4.0
Pr08 M08 – 6 – 08 Screw feed gear motor ON time in power 3 work phase
OUTPUT 3 SCREW
FEED
Seconds 0.1 – 8.0 4.8
Pr09 M08 – 6 – 09 Screw feed gear motor ON time in power 4 work phase
OUTPUT 4 SCREW
FEED
Seconds 0.1 – 8.0 5.4
Pr10 M08 – 6 – 10 Screw feed gear motor ON time in power 5 work phase
OUTPUT 5 SCREW
FEED
Seconds 0.1 – 8.0 6.2
Pr11 M08 – 6 – 11 Alarm delay ALARM DELAY Seconds 0 – 120 90
Pr12 M08 – 6 – 12 Brazier cleaning duration BRAZIER CLEANING Seconds 0 – 120 50
Pr13 M08 – 6 – 13 Flue gas minimum temperature for considering the stove on MINIMUM THRESHOLD °C 40 – 600 112
Pr14 M08 – 6 – 14 Flue gas maximum temperature
MAXIMUM
THRESHOLD
°C 200 – 880 880
Pr15 M08 – 6 – 15 Flue gas temperature threshold for the air exchanger start-up (NOT USED) FAN THRESHOLD °C 200 – 720 720
Pr16 M08 – 6 – 16 Flue gas extraction speed in ignition phase
IGNIT FLUE GAS
SPEED
RPM 500 – 2800 2000
Pr17 M08 – 6 – 17 Flue gas extraction speed in start phase
START FLUE GAS
SPEED
RPM 500 – 2800 1800
Pr18 M08 – 6 – 18 Flue gas extraction speed in power 1 work phase P 1 FLUE GAS SPEED RPM 500 – 2800 1500
Pr19 M08 – 6 – 19 Flue gas extraction speed in power 2 work phase P 2 FLUE GAS SPEED RPM 500 – 2800 1650
Pr20 M08 – 6 – 20 Flue gas extraction speed in power 3 work phase P 3 FLUE GAS SPEED RPM 500 – 2800 1750
Pr21 M08 – 6 – 21 Flue gas extraction speed in power 4 work phase P 4 FLUE GAS SPEED RPM 500 – 2800 1900
Pr22 M08 – 6 – 22 Flue gas extraction speed in power 5 work phase P 5 FLUE GAS SPEED RPM 500 – 2800 2100
Pr23 M08 – 6 – 23 Exchanger 1 motor speed in output 1 working mode (NOT USED) AIR 1 SPEED Volt 65 – 225 65
Pr24 M08 – 6 – 24 Exchanger 1 motor speed in output 2 working mode (NOT USED) AIR 2 SPEED Volt 65 – 225 65
Pr25 M08 – 6 – 25 Exchanger 1 motor speed in output 3 working mode (NOT USED) AIR 3 SPEED Volt 65 – 225 65
Pr26 M08 – 6 – 26 Exchanger 1 motor speed in output 4 working mode (NOT USED) AIR 4 SPEED Volt 65 – 225 65
Pr27 M08 – 6 – 27 Exchanger 1 motor speed in output 5 working mode (NOT USED) AIR 5 SPEED Volt 65 – 225 65
Pr28 M08 – 6 – 28 Threshold beneath which the appliance is considered to be OFF THRESHOLD OFF °C 80 – 600 140
Pr29 M08 – 6 – 29 Flue gas extraction speed in brazier cleaning phase
FLUE GAS-EXT
CLEANING
RPM 500 – 2800 2800
Pr30 M08 – 6 – 30 Screw feed gear motor ON time in cleaning phase
CLEANING SCREW
FEED
Seconds 0.0 – 8.0 1.8
Pr31 M08 – 6 – 31
Flue gas extractor encoder enable
(NOT USED)
ENCODER On – off On – Off On
Pr32 M08 – 6 – 32 Screw feed brake time BRAKE TIME Seconds 0.0 – 0.5 0.2
Pr33 M08 – 6 – 33 Pump activation threshold PUMP THRESHOLD °C 20 – 70 55
Pr34 M08 – 6 – 34
Water pressure switch enable
(NOT USED)
WATER
PRESSURESW.
On – off On – Off On
Pr35 M08 – 6 – 35 Water pressure threshold (NOT USED)
PRESSURE
THRESHOLD
Bar 1.5 – 3.0 2.5
Pr36 M08 – 6 – 36 Screw feed motor reducer ON time in DHW output working mode DHW SCREW FEED Seconds 0.1 – 8.0 6.2
Pr37 M08 – 6 – 37 Flue gas intake speed in DHW output working mode
DHW FLUE GAS-
INTAKE DEVICE
RPM 500 – 2800 2100