30
PELLET-BURNING BOILER ECOMPACT 150-190-250-290
EN -
Rev 1.1
Modifying the working power
To modify the maximum working power you must select
“SET POWER”
by pressing buttons 5 or 6. Press buttons 5 and
6 to change the setting. During this operation, the display will appear as in the following picture.
Set
1
2
3
6
5
4
After setting the desired value, press button 4 or wait a few seconds to confirm.
Changing the water temperature boiler or buffer
- Boiler Water Temperature
For system types 1, 2 and 3, to modify the boiler water temperature, simply select
“SET H2O”
by pressing button 2. Now
use buttons 1 and 2. During this operation, the display will appear as in the following picture.
Set
1
2
3
6
5
4
After setting the desired value, press button 4 or wait a few seconds to confirm.
During the working mode the appliance enters
“Economy mode operation”
when that temperature value is reached.
- DHW storage boiler temperature
For system type 3, to modify the boiler temperature, simply select
“SET BOILER”
by pressing button 1. Now use buttons
1 and 2. During this operation, the display will appear as in the following picture.
Set
1
2
3
6
5
4
After setting the desired value, press button 4 or wait a few seconds.
During the working phase, if the boiler is in demand the appliance will switch to
“Economy mode”
if T.H2O > SET
10°C.
Here below are the operating modes in the event that the
“SET BOILER”
temperature is reached:
70°
C
SET H2O
65°
C
SET BOILER
3
POWER SET
