IV. Advanced operation
Note:
Before installing this product, please make sure your device has the built-in
Bluetooth
®
feature available.
A. Pairing the speaker with your mobile device in Bluetooth
®
mode
1. Turn on the speaker.
2. Set your
Bluetooth
®
phone to “discover” the wireless speaker.
3. The
Bluetooth
®
indicator LED will start blinking to indicate that the device has entered into
the pairing mode and is ready to be detectable for the first time.
4. Tap the newly discovered audio device
(KBS-600)
displayed on your mobile phone, in
the
Bluetooth
®
list.
5. If you have a lower
Bluetooth
®
version, you may be prompted to enter the passkey
0000
(4 zeros).
6. If pairing is successful, a tone will be heard, and the LED light will turn solid blue. If after 60
seconds the pairing process fails, please repeat steps 1 through 6 described above.
7. We recommend turning off the device when not in use. The speaker will shut off
automatically after a period of inactivity, as long as it is not in the
Bluetooth
®
mode.
Note:
The speaker will connect to
Bluetooth
®
automatically if the device supports automatic
connection.
B. Pairing the speaker with your mobile device in TWS mode
1. Power on the two
KBS-600
speakers and make sure they are both in pairing mode.
2. Press and hold the Multi-function button on one of the units (this one will become
your master unit) for approximately 4 seconds or until you see the
Bluetooth
®
LED stops
blinking on the second unit (a tone will also be emitted). Once you hear the tone, TWS
pairing was successful.
Note:
the master unit will remain in pairing mode.
3. Release the multi-function button once the TWS pairing has successfully paired both
speakers, as per previous step.
4. Follow section A above to connect the master speaker to
Bluetooth
®
C. Unpairing speaker from TWS mode
Briefly press the power button on the master unit, the
Bluetooth
®
LED on the second unit
will start blinking (a tone will also be emitted). Once you hear the tone, TWS un-pairing
was successful.
B. Turning the speaker units on or off
• To turn on the speaker, press and hold the Power button for about 2 seconds.
• The
Bluetooth
®
indicator LED will turn on and you will hear a tone. The
Bluetooth
®
LED
will momentarily turn on, then flash indicating that is ready for pairing mode or become
solid once it is paired to a device.
• Press and hold the Power button again for 2 seconds to turn off the speaker. The
Bluetooth
®
LED will turn off and you will hear an audio tone.
C. Using the speaker in Auxiliary mode
• Connect one end of the 3.5mm stereo cable into the auxiliary port on the speaker.
• Proceed to connect the other side of the 3.5mm stereo cable into the media device of
choice, such as a laptop, MP3/4 player, smartphone or tablet.
• Turn on the speaker. The Speaker will automatically connect to Aux in, and you will hear
a prompt.
• If it doesn't connect, briefly press the power button on the speaker to select the Aux in
mode or the mode of choice.
• Select the input mode of choice using the source button on the unit.
• Play an audio file to listen to music.
Summary of Contents for KBS-600
Page 1: ...KBS 600 Oryx...
Page 20: ...NOTES NOTAS NOTES NOTAS...