III. Basic operation
A. Charging the speaker
• Plug one end of the supplied Micro-USB cable into the speaker's Micro-USB port and the
other end to the USB port of a 5VDC USB adapter to charge the battery.
• The battery takes around 4 hours to fully charge.
• Make sure that the speaker is fully charged before using it for the first time.
• While the speaker is being charged the power LED indicator glows red with the speaker on or
off.
• Power LED glows red and the battery indicator LED's individually flash when the speaker is on.
• Power LED turns Off and the battery indicator LED's lit up solid once it is fully charged when
the speaker is on.
Note:
If the speaker is completely discharged or has not been charged for a while, it is
recommended to charge it for at least 10 minutes prior to powering on the speaker.
1. Lanyard
2. Power/Mode button
3. Volume up+/Next track button
4. Volume down-/Previous track
button
5. Play/Pause/Answer call/End call/
Redial/Multi-function button
6. Bluetooth
®
release button
7. AUX IN cable connection
interface
Components
Description
Carrying string for easy transport
Once unit is ON, press this button to change
between
Bluetooth®
mode and Aux mode.
Note:
You will be able to change modes only if a
device is connected to Aux In in the speaker.
In order to adjust the volume level, briefly press the
button.
Press and hold the button to play the next track.
In order to adjust the volume level, briefly press the
button.
Press and hold the button to play the previous
track.
Briefly press this button to play or pause audio.
Briefly press this button to answer an incoming call or
end the call.
Press and hold this button to reject the call.
Press this button twice to call back the last number
dialed on your phone.
Note:
Audio will stop and resume automatically once
the call is ended.
Press and hold this button to release
Bluetooth
®
connection.
Use this input to connect any external audio device
fitted with a 3.5mm stereo output.
8. Micro-USB charging port
9. Power LED indicator
10. Microphone location
11. Bluetooth
®
LED indicator
12. Battery LED charge indicator
Use this Micro-USB connector to connect to
an external 5VDC power source
This LED indicates power status
Microphone location
This LED indicates the status of the
Bluetooth
®
connection.
This LED indicates the charging status of the
speaker while it is powered on.
Note:
if the speaker is off, then only the
Power LED will be active.
Summary of Contents for KBS-600
Page 1: ...KBS 600 Oryx...
Page 20: ...NOTES NOTAS NOTES NOTAS...