Klever ZTT-3,2 Strige, Operation Manual

Page: 24 / 64

24
5 Control mechanisms
The control knobs of the tractor hydraulic distributor move the mower into the working
position. To do this, place the hydraulic cylinder of the tractor hitch system in the lower
position, and the hydraulic cylinder of the mower into the "floating" cylinder.
The support of the mower must be lifted up and fixed with an axis on the lower hole.
WARNING! In the operating position of the mower, the retainer 2 (Figure 5.1) of
the telescopic locking device 1 must be installed in the hole B.
In the transport position of the mower, the locking device 2 of the telescopic
locking device 1 must be installed in hole A.
WARNING! Failure to comply with these requirements will result in failure of the
mower.
A - transport position of the mower B - working position of the mower
1 - Telescopic locking device; 2 - Clamp
Figure 5.1 - Telescopic locking device