Disassembling and Reassembling the Sonar Head Unit
4-3
4.
Turn the Sonar Head Unit
on its side and remove the
six M6 x 16 mm Phillips
head screws that secure the
bottom of the forward and
aft fairings and the skid
plate to the frame.
5.
Slide the forward and aft
fairings off the Sonar
Head Unit frame. The
connectors on the sonar
electronics housing can
now be easily accessed as
shown in Figure 4-4.
Figure 4-2:
Removing the Phillips Head Screws
from the Skid Plate
Skid plate
Figure 4-3:
Sliding a Fairing off the Sonar
Head Unit Frame
Summary of Contents for HYDROCHART 3500
