Instructions for use, installation and connection
27
Setting the conventional (manual)
operation
To be able to use the oven in conventional mode,
the symbol
AUTO must not flash,
so always
check the program timer: in case the AUTO
symbol flashes, press button
4. When the
symbol AUTO disappears, the oven is set
to
the conventional (manual) mode of operation
!
IMPORTANT!
•
By pressing particular buttons you may at any
time check and reset your settings.
•
Jog dial 5 may be turned either direction.
•
In case you wish to interrupt programmed oven
operation, you must first reset the settings back
to 0.00 and press button
4
, to make the symbol
AUTO disappear.
•
In case of power failure new clock setting is
required!
Semi-automatic operation
In this mode you determine the period of oven
operation (period of operation).
Maximum setting is 23 hours and 59 minutes!
Procedure:
Example for easier setting procedure:
Let's set the operation period to 1 hour and 20
minutes (1.20)!
1. Setting the operation period:
Press button
2
(display indicates 0.00 and
symbol 7) and turn jog dial 5 until it shows
1.20 (when you start turning the jog, symbol
AUTO is lit). When this is set and you stop
turning the jog, after 5 second lapse the
display indicates daily current time and
symbols AUTO and 7 are lit.
2. Turn the oven on:
Use oven buttons to set the heating mode and
roasting temperature.
3. Oven starts operating immediately after
turning on (start of roasting/baking); symbols
AUTO and #7 are lit during the operation.
4. After the expiry of preset time – in our case
after 1 hour and 20 minutes -
−
the oven stops automatically
(roasting/baking is over),
−
sound alarm is heard which may be
switched off by pressing any button 1, 2, 3 or
4, or left to switch on automatically after 2
minutes,
−
symbol 7 disappears,
−
symbol AUTO is flashing.
5. Turn the oven off, press button 4 and the
symbol AUTO 3 disappears!
When the symbol AUTO disappears the oven
is ready for conventional (manual) operation.
Automatic operation
In this mode you determine the period of oven
operation
(period of operation)
and the
switching off time
(end of operation).
Maximum setting is 23 hours and 59 minutes!
Setting of switching off time is = current time +
maximum 23 hours and 59 minutes).
CAUTION!
Oven will not operate in automatic mode unless
you turn it on by means of selected buttons!
Automatic operation procedure
Example for easier setting procedure:
Let's set the operation period to 1 hour and 20
minutes (1.20), and the end of operation at 13.52!
1. Check whether the clock is set to indicate
current time of day.
2. Setting the operation period:
Press button
2
(display indicates 0.00 and
symbol 7) and turn jog dial 5 right, until it
shows 1.20 (when you start turning the jog,
symbol AUTO is lit). When this is set and you
stop turning the jog, after 5 second lapse the
display indicates daily current time and
symbols AUTO and 7 are lit.
3. Setting the end of operation
Press button
3.
Turn the jog dial 5 to set the
desired time (display indicates the nearest end
of operation = current time + preset period of
operation), until 13.52 appears, when the oven
is supposed to stop operating. When you stop
turning the jog, after approximately 5 second
lapse the display indicates daily current time
and symbol 8 is lit. Symbol 7 disappears (and
reappears when oven starts operating after
certain time).
4. Turn the oven on:
Use oven buttons to set the heating mode and
roasting temperature.
5. Oven starts automatic operation at the
selected time (in our case at 12.32 hrs) (start
of roasting/baking, arrow 2 disappears),
operates for 1 hour and 20 minutes, and stops
operating at 13.52 hours; symbol 7 is lit during
the operation.
6. When the oven stops operating:
−
intermittent sound alarm is heard which may
be switched off by pressing any button 1, 2,
3 or 4, or left to switch on automatically after
2 minutes,
−
symbol 7 disappears,
−
symbol AUTO is flashing.
7.
Turn the oven off, press button 4 and the
symbol AUTO disappears!
When the symbol AUTO disappears the oven
is ready for conventional (manual) operation.
