Instructions for use, installation and connection
26
Procedure
Example: roast core temperature is 85°C
1. Connect the probe and stick it inside the roast.
When you connect the probe the red sector of
the timer clock display indicates the probe
symbol and the original preset temperature
60
°
C, red arrow number
4
is flashing.
2. Set the desired meat core temperature:
Press button 4, arrow 5 starts flashing, turn
the jog dial 5 to the desired temperature 85°C.
When you stop turning the jog dial 5, after 4
second lapse the display starts indicating 30
(i.e. the starting temperature of the meat core,
if it is higher than 30°C) and symbol
°C
flashes
, arrow 4 is lit.
Caution: if you do not set any new
temperature with the jog dial 4 seconds
after pressing the button 4, the display will
automatically switch to 30°C or the actual
temperature of the meat core.
3. Switch the oven on: by using appropriate
buttons set the heating mode and roasting
temperature.
4. The oven starts to operate immediately
(roasting is initiated), and the probe measures
the rising temperature. During the operation
red arrow 4 is lit and the display indicates the
temperature, symbol °C is flashing.
5. Once the preset temperature of the meat
centre is reached (in our case 85°C), the oven
stops operating (roasting is finished).
−
this is signalled by the intermittent sound
alarm which may be switched off by
pressing any of the buttons. or it stops
automatically after 2 minutes;
−
reached temperature is flashing (85°C);
−
symbol °C and red arrow 4 are lit.
6. Switch the oven off.
7. Pull the probe from meat and disconnect it
from the mains. The red sector disappears
from the display.
CAUTION!
Use only the sensor probe designed for this
particular type of oven.
Dimmed display illumination
Between 22.00 and 5.59 hours the display
illumination is automatically dimmed if the
program timer is not in operation during this
period.
Electronic digital program timer
(some models only)
Electronic timer provides programmed oven
operation in two different modes:
Semi-automatic:
immediate start of oven
operation, and preset automatic stop time;
Automatic:
entirely automatic oven operation
preset start and stop time;
1. Alarm setting button
2. Operation period setting button
3. End of operation setting button
4. Conventional operation setting button
5. Jog
dial
- symbol is lit from the moment of setting to
the end of oven operation
- symbol is flashing during the oven operation
6. Timer
Single-handed timer control
Program timer clock may be controlled single
handed. By pressing any of the buttons 1 through
4 (and releasing it) and by turning the jog dial 5
you may select the desired setting within
4
seconds. In case no setting is selected during
these 4 seconds, particular function will not
be activated
(the display returns back to the
current daily time).
Setting the current time
After connecting the appliance to the mains the
green display indicates flashing
AUTO
and
0 00
intermittently. Current time is obtained by
pressing buttons 1 and 2 simultaneously (0.00 is
lit, AUTO remains flashing). Set the correct time
by turning the jog button 5 (now AUTO also
disappears). The clock starts running 5 seconds
after the last setting
