KLAXON Mobility Gmbh – ENG
KLICK Hybrid User's Manual (ENG) - rev.01 of 30.06.2018
9
•
The number (3) in the lower part of the display shows the distance travelled, in km.
•
The number (4) represents the desired assistance level (in hybrid and electric mode).
•
The number (5) indicates the USB socket used to recharge devices (smartphone, front LED, etc.).
11.2 TURNING ON AND SETTING UP THE DEVICE (FIGURE 22 E 23).
A. Turning on and selecting the speed
•
Press and hold down the “
POWER
” key for 5 seconds, until the display comes on.
•
Press the “
+
” and “
-
“ keys to select the desired maximum assistance level (shown in the box on the left side of the display,
number (4) in the legend); the electric power assistance levels including, for example, 0 (motor deactivated), 1 (minimum
level, 10%), 2 (normal level, 20%), 3 (medium level, 40%), 4 (high level 60%), 5 (maximum level 80%) can be selected.
B. Data navigation
•
When the display comes on, the initial screen shows (in number 3) the partial distance (TRIP) of use of the device.
•
If you press the “
INFO
” key, the total distance is shown (TRIP – number 3).
•
If you press the “
INFO
” key again, the maximum speed reached will be shown (MAXS – number 3).
•
If you press the “
INFO
” key another time, the average speed will be shown (AVG – number 3).
•
Pressing the “
INFO
” key will show the residual charge of the battery, expressed in km, according to the assistance level
selected (TO GO – number 3).
•
Pressing the “
INFO
” key again will show the instantaneous power absorption of the motor expressed in watts (number 3).
C. Data reset
•
When the display is turned on, press the “
INFO
” key twice in quick succession to enter the MENU. At this point, the submenu
TC will appear (number 2).
•
Press the “
+
” key to switch from “
N
” to “
Y
” (number 3); at this point, the partial distance and speed data will be reset.
•
Press the “
INFO
” key twice to exit from the MENU and return to the initial screen..
D. Screen backlight
•
If you press and hold down the “
LIGHT
” key for 5 seconds, the screen backlight will be turned on.
•
To turn off the backlight, press the “
LIGHT
” key again for 5 seconds.
E. Maintain speed function
•
Press and hold down the “
-
” key for 5 seconds to activate the Maintain speed function automatically. This function increases
the speed of the device to 4.5 km/h and maintains it for as long as the pushbutton is held down.
•
When the key is released, the device will stop accelerating instantaneously.
DANGER
Every action and/or tampering of the display to change performance and KLICK’s security is strictly
prohibited. The sole and only actions possible are those specified in paragraph 11.2 of this User’s Manual.
NOTE: For further information on the display, see
www.klaxon-klick.com
or contact an authorised KLAXON dealer.
11.3 USE
Figures 24 and 25 illustrate the pedalboards of the Klick device and identify the elements that make them up (listed here below).
1.
Cranks
2.
Accelerator control
3.
Display control button panel
4.
Display
5.
Brake grip and lever
6.
Manual transmission controls
The device has no reverse gear. To move in the opposite direction, turn the wheelchair using the push-rims on the wheels of the
wheelchair; while doing this, keep one hand on the grips of the device. This will enable you to control the direction of movement
and prevent the cables (electrical and mechanical) from getting twisted with consequent damage and/or breakage.
CAUTION
Using the Klick device in reverse gear could cause it to malfunction if the cables get damaged and/or
broken and accidentally activate the accelerator lever if the device is on with a forward gear engaged.
With regard to this, before moving backwards, the forward gear must be set to “0” and the device must
be turned off. Failure to follow these indications could cause damage to the user and third parties (people
and/or property).
A. ELECTRIC mode
Having installed the device, turned on the display and selected a forward speed, the device will start to move when the accelerator
control is activated. To stop the device, activate the brake lever (Figure 26). The KLICK brake is equipped with an additional motor
deactivating safety mechanism when the lever is activated.
DANGER
If there are any obstacles, drops or hazards of any other kind not situated at a safe distance, turn off the
KLICK device and move the wheelchair to a safe place.
