Klarstein 10031979, Manual

Page: 25 / 64

25
EN
• Week timer: The week timer can be set for four operating cycles a day and seven
days a week. The display shows “Week Timer“. Press the setting button (16, or 18
on the remote control) to display a day: the weekday indicator (6) flashes. Use the
arrow buttons (14, 15) to select the first operating cycle. Press the setting button (16)
to go to the selection of a start time, which you can adjust with the arrow buttons
(14, 15). Press the setting button (16) again to set a switch-off time. Continue in the
same way with the setting of the (maximum) 4 operating cycles a day for 7 days a
week. When you have made all the necessary settings, press the OK button (22)
and save them.
• Delete timer settings: To clear all previous settings (day or week timer), press and
hold the setting button (16) on the display for 10 seconds.
Turn off
Press the ON/OFF button to turn it off. The heater is no longer in operation. Press the
power switch to turn off the unit completely.
CLEANING AND STORAGE
Cleaning
It is very easy to clean the back of the unit. Hold the convector heater by its sides with
both hands and pull it upwards and then forwards. Now you can clean behind it. Return
the heater to its place after cleaning.
Storage
If you do not plan to use the heater for extended periods of time, it is recommended that
the heater is cleaned and then stored (preferably in its original packaging) in a cool dry
place.