Klarfit 10030354, Manual

Page: 41 / 116

41
EN
Step 3
Attach Vertical support (5) to Main base tube
(1) using reinforced plate
(48) and Hex bolts M10x50 (60 - 2 sets)
washers and nuts.
Attach Upper support (4) to Vertical support
(5) using reinforced plate (48) and Hex bolts
M10x50 (60 - 2 sets) and insert chrome bars
(22) into holes of upper support (4) using
Hex bolts M10x25 (63 - 2 sets).
Attach seat support (6), reinforced tube (8)
to Vertical support (5) using reinforced plate
(48) and Hex bolts M10x50 (60 - 2 sets),
bolts M10x45 (61 - 1 set) washers and nuts.
Step 4
Attach the chest press (10) to upper support
(4) using Hex bolts M10x45 (60 - 2 sets),
washers and nuts.
Attach the pulley shaft (30), prop support
(51) to vertical support (5) using Hex bolts
M10x50 (51 - 2sets), washers and nuts.