SONNENWIESE
PAGE 15
5000511/11.19
Maintenance
5.5.
Filter mats
5.5.1
Replacing the filter mats
Air to cool the device is fed into the entrance of the devices
through micro filter mats. Lint, hair, dust particles, etc., are filtered
out there, so that interior components, such as lamps, only need to
be cleaned at longer intervals. These filtered-out particles clog the
filter mats after prolonged use and this impairs cooling of the
device.
Therefore, regularly replace the filter mats in order to ensure the
device does not overheat. Dirt accumulation and operating hours
determine the replacement intervals.
4
5
9
Only order original filter mats from your specialized
dealer or the equipment manufacturer.
Check the filter mats after every 200 operating hours.
Always disconnect the device from the power supply.
Opening the dust cover
'
Opening/closing the dust cover, see Section 5.1.
Changing the filter mat
1.
Remove the filter mat.
2.
Take the new filter mat strip (
9/5
) and feed the long side into
the holder (
9/4
).
3.
Fold the filter mat strip against the unit. The filter mat strip is
firmly locked into place.
Closing the dust cover
'
