KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-250D,256D,215D
: +91.80.
6835 7800
Page 15 of 50
Operation Check
1.
Check and add oil
1.1
Check if connections of everywhere if they are loosening and fixed upon the moment
needed.
Name
Moment (Nm.)
Flange and engine
20-25
Flange and transmission box
35-40
Transmission reverse axle locked bolt
26-40
Engine support frame and walking case locked bolt
35-40
Walking case end cover locked bolt
10.6-15
Walking case and tow bar locked bolt
50-60
Transmission box and walking case connection bolt
35-40
Tow bar
45-60
Engine bottom seat locked bolt
35-40
Handlebar fixed bolt
35-40
1.2 Check if all rod (Oil, clutch, reverse, gear shift) are flexible, and adjust them well.
1.3 Turn gear shift rod into neutral.
1.4 Add oil
①
Add SAE10W-40 into crank case of engine.
②
Add Nr.20 oil into transmission box. Put Inter-cultivator horizontal, take off oil ruler.
And add oil through transmission box filling hole. And insert oil ruler to check oil level. If
oil level is between up limit and low limit, turn off oil ruler.
④
According to working condition choose different oil.
2.
Start
2.1 Start engine according to introduction of engine operation.
2.2 Engine should work at idling speed (1450-1750r/min) for two or three minutes.
2.3 Check if engine work right, if not, stop to check.
3. Operate
