KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-250D,256D,215D
: +91.80.
6835 7800
Page 16 of 50
! NOTE
: Inter-cultivator should be break-in before using, according to introduction of
SECTION NINE.
3.1 Using of flameout switch.
Start place
Stop place
! NOTE
: Inter-cultivator should break-in before use.
3.1 Using of flameout switch.
3.1.1
Start
: Turn flameout switch to the place as shown above and use lock clip to block
switch. And then start the engine
3.1.2
Work
: While working, hold flameout switch. Turn lock clip back. And hold on clutch
rod to change gear. Then hold on flameout switch, and release clutch rod and then start
weeding.
3.1.3 In emergency situation, release flameout switch to stop the engine.
! WARNING: While weeding
, don’t turn lock clip.
3.2 Slow gear
3.2.1 Hold on the clutch rod with left hand and meanwhile press down flameout switch to
disengage the clutch.
3.2.2 Pull back the shift gear rod with right hand and then turn to slow gear. After shifting
the gear, use right hand to hold the handle grip.
! NOTE: D
on’t hold reverse handle during the above situation.
3.2.3 Slowly release clutch rod, then clutch will engage and Inter-cultivator can work at
slow speed.
3.2.4 Turn accelerator to bigger, then Inter-cultivator can work on slow gear at 5km/h.
3.3 Fast gear
3.3.1 Hold on clutch rod with left hand and meanwhile press down flameout switch to
disengage clutch.
3.3.2 Pull back the shift gear rod with right hand and then turn to fast gear. After shift gear,
use right hand to hold handle grip.
! NOTE:
D
on’t hold reverse handle during the above situation.
3.3.3 Slowly release clutch rod, then clutch will engage, and Inter-cultivator can work at
slow speed.
3.3.4 Increase the accelerator, then Inter-cultivator can work on fast gear at 10km/h.
3.4 Reverse gear
3.4.1 Hold on clutch rod with left hand and meanwhile press down flameout switch to
disengage clutch.
