KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-250D,256D,215D
: +91.80.
6835 7800
Page 13 of 50
Operation and use of Inter-cultivator
Ⅰ
.
Up packing assembly (Picture4)
1.
Fix the body of Inter-cultivator install running wheels on both sides of hexagonal shaft
and fix the wheels with 2 bolts M8×55, 2 nuts M8.
2.
Handlebar installation: turn the two fluted discs on the handlebar to right with the fluted
discs on both sides of the disc plate. Pay attention to adjust handlebar position.
Connect it with auxiliary bolts M16×140 and gasket 16, then fixes the clutch cable,
throttle cable and backshift cable on the handlebar with wire dip.
3.
Resistance rod installation: take away the pins between the resistance rod and
connecting shelf to get the resistance rod and adjust its direction by 180°.
4.
Mud fender installation: install frames of both sides and protection frame components
on the Inter-cultivator. Then install protection panel of both sides and paddy field
protection panel of both sides.
Ⅱ
.
Installation and adjustment of cables
1.
Clutch cable adjustment (look at picture5 and 6)
