KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-250D,256D,215D
: +91.80.
6835 7800
Page 14 of 50
1.
Unlock nuts on the screw rod.
2.
Instantaneously rotate the screw rod to show the shortest part of the handlebar.
3.
Thread the cable head into clutch plug behind the gear box assy. and make sure the head
is in the big hole of the plug.
4.
Thread the steel wire-rope into the M8 hole of arm plug, and then properly press down
the clutch fork arm to insert the cable head into clutch plug.
5.
Rotate out the screw rod and clip it repeatedly, unlock the clutch handlebar until spring
force of clutch can reposition the bar, and then fasten the nuts.
2.
Backshift cable adjustment (Picture5 and 6)
1.
Unlock the fasten nuts on the screw rod.
2.
Instantaneously rotate the screw rod to show the shortest part of the handlebar.
3.
Thread the cable into the backshift shaft at the side of gear box and make sure the cable
head is in the big hole of shaft.
4.
Properly counterclockwise rotate the backshift fork shaft, thread the cable into the narrow
slit of backshift plugs through the side of the gear box and make sure the cable head is in
the big hole of the plug.
5.
Rotate out the screw rod and holdfast it repeatedly, unlock the backshift bar. When spring
force can reposition the bar, you should fasten the nuts.
3.
Throttle cable adjustment (look at picture7)
Diagram
①
. Turn throttle switch to the fastest position.
②
. Thread the steel wire-rope of the gun into the pole
and plug of regulation panel of the diesel engine
gun.
③
. Fasten the steel wire-rope and fix the screw.
Adjust the throttle switch repeatedly until the gun bar of
the regulation panel can be in the
