CONTENTS:
PAGE 1
...................................
Important Safety Information
PAGE 2
....................................
Controller Quick Start Guide
PAGE 2
.........................................
Installation Requirements
PAGE 2–3
......................................
DC Cable Requirements
PAGE 3–6
............................................................
Dispensing
PAGE 7
..........................................
Cleaning & Maintenance
PAGE 7
……………..........………….…………………………..
Fault Codes
INSTRUCTION MANUAL
IMPORTANT SAFETY INFORMATION
WARNING
Read entire manual for important
safety information before using
your KRYO. Failure to follow warnings
could result in injury & void warranty.
Please read this entire instruction manual for important
safety information prior to the use of your KRYO.
Failure to follow these instructions may result
in injury and/or product damage and will void the product
warranty.
GENERAL PRECAUTIONS:
•
Avoid external heat sources such as direct sunlight, gas
stoves, or other heat-generating appliances.
•
Ensure that there is always at least 4" of clearance on each
side of the KRYO to allow adequate airflow. Not allowing
adequate ventilation will reduce performance, increase
power consumption and void warranty.
•
Only use approved cleaners and sanitizers to clean the
product lines.
•
Do not set the temperature below 0°C/32°F or you risk
freezing the beverage you are dispensing.
•
Only use on a flat surface or at a maximum angle of 20
degrees off level.
•
If using a 12V power inverter to power the NOMAD from
your vehicle's 12V power outlet, never use an inverter rated
to less than 500W power at 100% duty cycle.
1