Installation and initial operation
22
01.04.2020
4.1.3.
Fit jib cable on excavator arm
The jib cable leads from the cab module in the driver's cab along the excavator
arm to the vicinity of the tiltrotator where is it connected with the NOX cable.
1. Screw on the NOX cable plug connection (1) on the left side of the excavator
arm.
2. Plug the jib cable into the plug connection and route it along the hydraulic
lines and into the driver's cab.
3. Fasten jib cable on the side to a hydraulic hose. In doing so, ensure that the
jib cable does not become constricted or kinked.
