Installation and initial operation
01.04.2020
43
Each roller can be separately set and calibrated. The following settings can be
implemented:
Setting
Function
Non-linearity
Increases the sensitivity of the roller at low deflection.
Kinshofer recommends 50%.
Dead zone
Describes the play around the centre position, where the
function is not activated.
Sensitivity
Adjusts the maximum output signal. The output signal may be
reduced for training purposes. Kinshofer recommends 100%
for normal operation.
Invert
Changes the direction of the roller.
1. In order to change the function of a roller, tap the symbol.
2. Tap the
Configure
button.
Setting rollers