background image

USER INSTRUCTIONS

Your stainless steel tank requires only annual servicing. You should employ a competent 

installer to perform the annual servicing. Normally this is timed to coincide with the annual 

boiler service.

If water discharges through the Temperature and pressure valve this indicates a fault and action 

is needed.

If the water is hot, turn off the heat source. 

Call out a competent plumber immediately and indicate that you have a fault with you’re 

pressurised tank.”

GUARANTEE

 Page 11 of 12

The TRIBUNE’S  stainless steel vessel carries a 20-year 

guarantee against faulty materials or manufacture provided 

that:

•  It has been correctly installed as per this document and all  

 

the relevant standards, regulations and codes of practice  

 

in force  at the time.

•  It has not been modified in any way, other than by  

 

kingspan.

•  It has not been misused, tampered with or subjected to  

 

neglect.

•  It has only been used for the storage of potable water.

•  It has not been subjected to frost damage.

•  The unit has been serviced annually.

•  The guarantee period starts from the date of purchase and  

 

no registration is required.

•  The guarantee is not transferable and rests with the  

 

original householder.

•  The system is fed from a public water supply.

Please note that invoices for servicing may 

be requested to prove that the unit has been 

serviced annually. 

EXCLUSIONS – THE GUARANTEE 

DOES NOT COVER:

•  The effects of scale build up.

•  Any labour charges associated with replacing the  

  unit  or its parts. 

•  Any consequential losses caused by the failure or  

  malfunction of the unit

GUIDANCE IN THE EVENT OF A PROBLEM

If you have a problem in the first year, contact the 

plumber who fitted the unit. Thereafter contact the 

plumber who carries out the annual servicing for you. If 

your Tribune develops a leak, please contact Kingspan 

Solar US.

Summary of Contents for Tribune













Reviews: