34
MQRB5143 Burner Tube Removal
1. Remove the six [6] DT screws from the lower portion of the Burner Tube Mount Brackets.
2. Slide the Burner Tube away from the Plumbing Connection until it disengages from the orifice.
3. Reverse these steps to reinstall.
MQRB5143 Burner System Removal/Installation Guide
-
Warning-
Turn off Unit and allow to cool before cleaning. Only a Qualified service technician
should service and repair this appliance.
1. Lift off Valve Access Cover. Remove Valve Heat Shield.
2. Remove the Glass Door from the unit. Loosen Liner Clips in Firebox Top & remove End Panels. Remove DT screws and lift out
the False Bottom.
3. Remove the fourteen [14] DT screws around the perimeter of the burner pan.
4. Carefully work the burner pan loose & lift the assembly upward to remove it from the firebox cavity.
Installation is the reverse of these steps. Ensure that the mounting surface is clean & fresh
Black
Mill Pac
is used to reseal
the burner pan.
Summary of Contents for Marquis Infinite MQRB5143LP
