Kingsman Fireplaces MQZCVBG34LPE2, Installation Instructions Manual

Page: 38 / 80

MQZCV34RGB Glass Back Liner Installation Option
STEP TWO: Bend down tabs at back corners of
False Bottom to give clearance for End Panels.
STEP THREE : First install a Glass Back Liner against back wall of
firebox at either end. Next install a Glass Back Liner in the center.
STEP FOUR : Attach top and bottom of liners with DT Screws.
NOTE: Install
Glass Back
Liners
Before
installing Glass
Side Liner from
Corner Kit.
CONTENTS:
[3] GLASS
BACK LINERS
BACK CLIP
(DISCARD)
⚠
CAUTION
-NOT TEMPERED GLASS-
-EXTREMELY FRAGILE-
– HANDLE WITH CARE-
STEP ONE: Remove Liner
Clip and screws from inside
of firebox with a 1/4” hex
driver. Discard Back Clip
but
Keep Screws.
KEEP DT SCREWS
⚠
Note: Discoloration of Glass Liners Is Not Covered Under Warranty.
Glass Liners may discolor during normal operation of your appliance. This is normal, and not considered a defect.
GLASS BACK
LINER
GLASS
BACK LINER
TOP
BOTTOM
NOTE: Remove [Qty 4] Lower Liner
Clips Attached to Media Tray. Keep
DT Screws. Lower Liner Clips may
be discarded.
TAB
38