VL60EG Grill Installation-
Compatible with Vented Chase
-Option-
⚠
Grill openings must be flush with or within 3/4” of enclosure top. This is to prevent excess heat from
becoming trapped in the top of the chase. See installation section of manual.
Parts List:
[1] Louver Grill (ready to paint)
[1] Outer Trim Grill Mount (ready to paint)
[8] #6 Black Screws
This Grill Meets Minimum Opening Air Free Requirements
Required Opening Dimensions:
60-5/8” wide x 3-5/8” tall x 2” deep
Outer Trim Dimensions:
61-3/4” x 4-7/8”
Installation:
1. Insert Outer Trim Grill Mount into opening and fasten to framing with a wood screw at each end.
2. Then insert Grill and attach with supplied #6 black screws. Do not over tighten screws.
Outer Trim
Grill Mount
Grill
Grill
Outer Trim
Grill Mount
Enclosure
Top
25
