King Pigeon M T Series User Manual Download Page 3

Page: 3 / 56

Page 3 of 56

King Pigeon Hi-Tech. Co., Ltd.

Ver 2.3

Industrial Ethernet Remote I/O Module

IoT Data Acquisition Module

Table of Contents

【

UPGRADE HISTORY

】

...........................................................................................................................................................4

1. Brief introduction

.................................................................................................................................................................4

2.Standard Packing List

............................................................................................................................................................ 5

3. Mainly Features

....................................................................................................................................................................6

4. Technical Specifications

....................................................................................................................................................... 6

5. Physical Layout and Installation Diagram

............................................................................................................................ 9

5.1 Physical Layout

....................................................................................................................................................... 9

5.2 Led Instruction

...................................................................................................................................................... 10

5.3 Interface Instructions for installation

................................................................................................................... 10

5.4 RTD/AI/AO............................................................................................................................................................. 15

RS485

...................................................................................................................................................................19

5.5 Setup the DIN1 High Speed Pulse Count & Low Speed Pulse Count Mode:

.............................................................20

6. Initialize/Reset the Module

................................................................................................................................................21

7. Settings&Operation

........................................................................................................................................................... 21

7.1 Ready to Set up:

....................................................................................................................................................21

7.2 Selection Description

................................................................................................................................................22

7.3 Basic Setting

......................................................................................................................................................... 23

7.4 Network Settings

.................................................................................................................................................. 24

7.5 Slave Settings

........................................................................................................................................................25

7.6 Register list

........................................................................................................................................................... 27

7.7 System Log

............................................................................................................................................................29

8. Modbus Protocol

................................................................................................................................................................30

8.1

Introduction to Modbus Register Address

............................................................................................................... 30

8.1.1 Read Input Coil (Function Code 2: Read Coil)

............................................................................................... 30

8.1.2 Read and Write Holding Coil

........................................................................................................................ 31

8.1.3 Read Input Register

...................................................................................................................................... 32

8.1.4 Read and Write Holding Register

......................................................................................................................... 34

8.1.5 Mapping Register----Transit BIT Register Address

....................................................................................... 36

8.1.6 Mapping Register----Transit 16-Bit Register Address

.................................................................................. 36

8.2Example of reading and writing registers.................................................................................................................36

8.2.1

Read the input coil of this device

.................................................................................................................36

8.2.2

Read this device holding coil

........................................................................................................................37

8.2.3 Write device holding coil

..............................................................................................................................39

8.2.4 Read native input register

............................................................................................................................41

8.2.5 Read local holding register

...........................................................................................................................42

8.2.6 Control the local holding register

.................................................................................................................44

8.3Read device map register

......................................................................................................................................... 46

8.3.1Read Bit mapping address data

8.3.2Rewrite the bit mapping address data

..........................................................................................................47

8.3.3Read 16-bit mapped address data

................................................................................................................48

8.3.4Write 16-bit mapped address data

...............................................................................................................49

9. Warranty

............................................................................................................................................................................ 50

10.Appendix Application of MQTT

......................................................................................................................................52

Summary of Contents for M T Series

























































Search results

Summary of Contents for M T Series

Reviews:

King Pigeon M T Series, User Manual, Page: 3 / 56

Search results

Summary of Contents for M T Series

Reviews: