manualshive.com logo in svg

King Pigeon M T Series, User Manual, Page: 22 / 56

Share
Download
King Pigeon M T Series User Manual Download Page 22

Page 22 of 56

King Pigeon Hi-Tech. Co., Ltd.

Ver 2.3

Industrial Ethernet Remote I/O Module

IoT Data Acquisition Module

3) At the PC, open the software, click “search device”, Double click the device you find and enter password(default
is 1234). After password verification, you can set parameters.

Tips:

* If the first connection is through a crossover cable to the PC, the device IP will be 192.168.1.110. You need to change the
computer IP to 192.168.1. * to find the device..

7.2 Selection Description

System Settings

[Login Password]:

Parameter setting can be done after login. The default password is 1234.

[Change Password]:

Modify the device password. After modification, you need to log in with the new password.

[Save Data]:

Save the parameter configuration to the device.

[Loading Data]:

Read the parameter configuration of the device. Please read the current configuration before

setting the parameters.

[Time/MAC address]

: Click this item to read and modify the device time and MAC address (restart to take effect

after the MAC address is modified).

[Restart]:

Click this item to restart the device.

[Close]:

Click this item to close the configuration software.

Device Search

[Login Password]:

Click this item to search device.

File Operation

[Load File]:

Import the previously exported configuration file parameter information to the configuration

software.

[Save File]:

Export the current parameter information on the configuration software to a computer configuration

Summary of Contents for M T Series

























































Reviews:

No comments