Kilsen KFP-AF Series, Installation Manual

Page: 38 / 80

Chapter 3: Configuration and commissioning
34 KFP-AF Series Installation Manual
Installer operation and configuration
This access level enforces a password-protected access policy and is reserved
for authorized users installing and configuring the control panel and fire system.
The default password is 4444.
The main menu
The Installer main menu is shown below.
Figure 15: The Installer main menu
Panel configuration
Use the Panel setup menu to access the control panel configuration options
shown below.
Table 6: Control panel configuration
Option Description
ID configuration Select this option to configure the control panel ID (for the fire
network) and description (the description will be displayed on the
LCD when the control panel is in standby).
Date and time Select this option to configure the control panel date and time, and
to synchronize the date and time in a fire network.
Day/night mode Select this option to configure the day/night mode time settings.
See “Day/Night mode” on page 28.
Regional options Select this option to configure the control panel's regional operation
mode
Firenet Select this option to configure the control panel fire network.
Communications Select this option to configure TCP/IP communication settings and
to safely remove a USB device.
Other settings Select this option to configure the 24V AUX output, fault mask,
sounder re-sound, and device LED options.
Load/save configuration Select this option to load a new configuration file or to save the
current configuration file to a USB flash drive.
Expansion boards Select this option to configure any installed expansion boards.