Centauri Energy Server
–
User Manual Model Number -GF-80000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
48
5.5.2.3 Off-Peak
Settings
:
The Off-peak setup menu includes three options as follows:
•
Off-peak electricity consumption:
During the set time, the system will shut OFF the rectifier. The PV
and the battery will supply power to the load until the battery voltage become low. The system will
then turn ON the rectifier to perform the limited current (1 A) charging.
•
Normal charging:
When the time reaches the set value, the system will turn ON the rectifier. The PV
and the rectifier will supply power to the load and the battery.
•
Limited current charging:
This option is only available in PV UPS Mode and ECO Mode. During the set
time, the rectifier will perform the limited current charging.
5.5.2.4 Protocol Settings:
The protocol settings are used to setup the 485-communication protocol. The following three items
can be set:
1)
Address: It is 1 by default.
2)
Baud rate: It is 2400 by default.
3)
Calibration: no
5.5.2.5 Language Selection:
Touch screen menus and data are available in both English and Chinese. You can select the language
by
tapping the settings icon “
” in the main interface and then tapping into “Language Settings” in
the “User Settings” menu.
5.5.2.6 Date and Time Settings:
Tap the
“
”
setup icon on the main interface,
go to “User Setting”
and click the
“Date/time” button
to set the current time and date of the Energy Sever.
5.5.2.7 Date Format Settings:
The date can be displayed in the following two formats by setting
“
DATE FOR
”
.
1)
Year/Month/Day
2)
Month/Day/Year
5.5.2.8 User Password/Control Password:
The system has password protection feature to secure the important control operations. The default
password is
“
87654321
”
. When the password is enabled, the Energy Sever and battery test operations
can only be performed after the password confirmation.
