Centauri Energy Server
–
User Manual Model Number -GF-80000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
34
4.10.2 Parallel System Power Cable Wiring Method:
This section describes the input and output wiring of the parallel system. After equipment is
completely positioned, the input terminals of each Energy Server are connected together; the output
terminals are connected together. The wiring diagram is shown below.
Fig 9 Parallel System Power Cable Connection Diagram
If separate bypass connections are used, connect the AC mains rectifier input terminals of each stand-
alone system together; the bypass input terminals should be connected together, and the phase
sequence connection must be correct.
Note:
Parallel redundancy mode is only available for PV UPS Mode
.
