Centauri Energy Server
–
User Manual Model Number -GF-80000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
28
4.5
Cabinet Handling:
Lifting equipment used for handling cabinets must have sufficient lifting capacity. Before placing in
the final position, you can lift or move the cabinet using a forklift or crane.
Perform the following operations while handling.
•
After lifting the plate on the bottom of the cabinet and removing the fixing screws, if a forklift is
used to lift, insert the forks of forklift into the gap between the pallet and the bottom of the
cabinet (refer to the reference point of the cabinet's center of gravity).
•
Lift the cabinet until the bottom of the cabinet leaves the pallet about 20 mm.
•
Once the cabinet leaves the pallet, pull the pallet away from the bottom of the cabinet. Keep
pallets in a proper way.
•
Use a forklift to move the cabinet to the final installation site.
•
Slowly lower the cabinet until it touches the ground.
•
Use the hardware provided by the user to fix the cabinet on the floor.
•
If you want to install the cabinets back to the wall side by side, you must fix one cabinet before
installing the next cabinet.
Fig 7 Schematic Diagram of System Handling
