Kilowatt Labs GF-80000-360Vdc-380Vac-3/3, User Manual

Page: 47 / 60

Centauri Energy Server – User Manual Model Number -GF-80000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
47
5.5.1.4 Password Setting:
•
Operation method:
→
Click the “ power-ON settings ” button to enter the corresponding setting interface.
→
Click “ Password Lock ” button, the system will display “L OCK PWD ” Information.
→
C lick the button again, the system will display “OPEN” or “CLOSE” information.
→
Click the “ YES ” button to confirm the setting.
5.5.1.5 Other Settings:
•
Operation method:
Click the “ Other Settings ” button to enter the corresponding setup interface.
•
Factory Reset:
When you click the “ Factory Rest ” button and then click “ OK ” button to confirm the operation, the
system will be switched to the factory settings and all the original user settings will be completely
cleared. Please conduct the operations above carefully! If the operation is necessary, be sure to set
the relevant parameters according to the requirements of the site system configuration to ensure
the system is in safe and reliable operation.
•
Clear Records:
When you click the “C lear Record ” button and then click “ OK ” button to confirm the operation, the
system will clear all recorded information.
5.5.2 User Settings:
Operation method:
→
Click the “ USER ” button and enter the password to enter the corresponding setting interface.
→
The user settings operation can only be done by the user or the technicians.
5.5.2.1 MPPT
Settings
:
MPPT settings are used to turn ON or turn OFF the MPPT Module.
5.5.2.2 INV
Settings
:
Manual Bypass: When the system needs maintenance, manual bypass needs to be turned ON, and
the system is forced to switch from inverter to bypass power supply. After system maintenance is
completed, it only allows inverter output after manual bypass is turned OFF.