Product Installation Manual
6
第八步
The Eighth step
取正面的档条
B
,用
M8X16
螺栓固定在立柱上并拧紧。
Take the front Bar B, fix it on the upright post with M8X16 bolt and tighten it
第九步
The Ninth step
参照接线图,将连接线和配件安装好
(
注意连接条要紧固在电池端子
上,参考扭矩
12
~
15N.m)
。
Referring to the wiring diagram, install the connecting wire and accessories
(note that the connecting strip should be fastened to the battery terminal with
a reference torque of 12 ~ 15n. m).
档条
B
Bar B
档条
B
螺栓
Bar B Bolt:M8X16
电池
Battery
连接条
Connector
电池螺栓
Battery terminal bolt
Terminal bolt M8X20 is equipped with 1 pcs flat
cushion and 1 pcs elastic cushion
注意:电池端子螺栓需要拧紧以及再
次观察电池正负极连接是否正确。
Note: the battery terminal bolts need to be tightened
and check again whether the positive and negative
electrodes of the battery are connected correctly.