Kikusui PLZ-3WH Series, Operation Manual

Page: 85 / 172

4-45
Chapter 4: Operating Procedure
Program: 03 :NI
003 Step [T009]
15.00A 5.0V 75.0W
CC S3, P03, L0000, 0002
Sequence: 1 :NI
P01, L0001, C2, E16
15.00A 5.0V 75.0W
CC S3, P03, L0000, 0002
(c) Running the program and sequence
● ●
● ● ●
Running the program
This paragraph explains how to execute the specified program once.
(1) Select “1: Edit” from the Sequence Menu and press
the [ENTER] key to display the Edit Menu. Select
“1: Edit Program” from the Edit Menu and press the
[ENTER] key.
Using the jog control or [ ] and [ ] keys, specify
the program number you want to execute. In this
example, program 3 is specified.
(2) Press the [RUN] key. The program execution starts.
The screen on the right shows that the program is
being executed.
● ● ● ● ● Running the sequence
This paragraph explains how to execute the specified sequence once.
(1) Select “2: Run” from the Sequence Menu and press
the [ENTER] key. The sequence appears. (When the
[RUN] key is depressed without selecting an item
from the menu, the sequence appears on the display
as well.) Using the jog control or [ ] and [ ] keys,
specify the sequence number.
(2) Press the [RUN] key. The sequence execution starts.
The screen on the right shows that the sequence is
being executed. The sequence number (S3) blinks.
The figure below shows the contents of the display during execution of this sequence.
Operating mode
Sequence number being executed
Program number being executed
15.00A 5.0V 75.0W
CC S3 , P03 , L0000 , 0002
Remaining number of loops
Step number being executed
Fig. 4.5-14
NOTE
The sequence number blinks during execution of the sequence and remains on continuously during a
pause.