Kikusui PLZ-3WH Series, Operation Manual

Page: 119 / 172

5-19
Chapter 5: Remote Control
Table 5.3-7
Header Argument Data Action Backup
number
NEWSEQ 1 Sets to the NV mode. (The second argument
②
exists.)
2 Sets to the NI mode. (The second argument
②
exists.)
①
4 Sets to the NR mode. (The second argument
②
exists.)
5 Sets to the NP mode. (The second argument
②
exists.)
11 Sets to the FI mode.
12 Sets to the FR mode.
1 Sets to the msec range.
②
2 Sets to the sec range.
3 Sets to the minute range.
4 Sets to the hour range.
SEQUENCE
①
1 - 8 Specifies the sequence number.
②
1 - 16 Specifies the start program.
③
1 - 9999 Specifies the number of loops (9999: infinite).
④
0, 1 - 8 Specifies the chain sequence number (0: no
specification).
⑤
0, 1 - 16 S p e c i f i e s t h e e n d p r o g r a m n u m b e r ( 0 : n o
specification).
⑥
0.0001 - 0.1 Specifies the execution time in the unit “s” in the FI or
FR mode.
SEQUENCE? 1 - 8 Returns the parameter of the specified sequence
number.
STEP
①
1 - Specifies the step number.
*
②
0 Specifies the step transition.
1 Specifies the ramp transition.
③
Set value Sets the value for each mode.
* ④
(Time) Specifies the time in unit of “s”.
⑤
0 (OFF) Sets the trigger output to “off”.
1 (ON) Sets the trigger output to “on.”
* ⑥
0 (OFF) Specifies a load off.
1 (ON) Specifies a load on.
* ⑦
0 (OFF) Cancels the short function.
1 (ON) Enables the short function.
* ⑧
0 (OFF) Sets the pause to “off. “
1 (ON) Sets the pause to “on.”
STEP ? 1 - Returns the parameter of the specified step number.
The arguments
marked by “*”
are not needed in
the FI and FR
modes.
Available
None
None
Available
None